Electrochemical Oxygen Analyzer Oxygen Purity Analyzer Ci-PC21

• Customization: Available
• After-sales Service: Supplied, Onsite, Online
• Warranty: 1.5 Years
• Model NO.: CI-PC21
• Sensor Life: 20000 Hours
• Accuracy: +- 2%Fs
• Repeatability: +- 1%Fs
• Transport Package: Sea/Air Packing
• Specification: CI-PC21
• Trademark: Cape Golden
• Origin: Beijing, China.
• HS Code: 9027100090
• Production Capacity: 200 Units Per Month

Product Description

Electrochemical Oxygen Analyzer Oxygen Purity Analyzer CI-PC21

The selective absorption of infrared by gas molecules is the basis of the design of electrochemical oxygen analyzer. S02,NOx,C02,CO,CH4 and other polar molecules have permanent electric torch, so it has vibration, rotation and other structures. According to quantum mechanics, the energy level of electrochemical oxygen analyzer splitting can be coupled with the incident characteristic long infrared radiation to produce absorption, and different polar molecules are absorbed by different spectral bands.


Product Characteristics

1. Specially designed gas chamber absorber, narrow-band filter has strong anti-interference ability and high detection accuracy;
2. High stability infrared light source, receiver constant temperature control, instrument stability;
3. Measurement of gas chamber mirror gold plating, corrosion resistance;
4. Isolated analog output, free to set 4-20 mA/0-20mA/0-1V/0-5V/0-10V/1-5V analog output mode;
5. Alarm function electrochemical oxygen analyzer: when the gas concentration deviates from the alarm value, the alarm value can be set arbitrarily within the full range;
6. Use RS485 (standard)/ RS232 (selection) of electrochemical oxygen analyzer.

Technical Parameters
Model: CI-PC21
Measuring principle: NDIR non-optical infrared analyzer
Measuring component: any one or two components can be measured NOx,SO2,CO,CO2,CH4,H2S. O2 Can be added to each component

Range based Required design	Minimum Range	Maximum range
NOx	0 to 1000 ppm	0-20%
SO2	ppm 0-500	0-100%
CO	0 to 20 ppm	0-100%
CO2	0 to 10 ppm	0-100%
CH4	0 to 200 ppm	0-100%
H2S	0 to WOO ppm	0-30%

 

Accuracy	± 2%FS
Repeatability	±1%FS
Zero Drift	±1%FS/7d
Range Drift	±1%FS/7d
Linear Error Limit	±1%FS
Response Time	T90<=60 s (sample flow 0.5 L/min)
Analog Signal	4~20 mA/0~20mA/0~1 V/0-5V/0-10V/1-5V, can set analog output mode freely
Maximum Load	provided according to user requirements, not affected by load within 500Ω maximum load
Ambient Temperature	-10~45°C
Ambient Humidity	less than 80% RH
Supply voltage	85-264 VAC 50/60HZ
Size	19-inch profile chassis L * W * H=483 mm * 300mm *177mm
Gas flow measured	500~1000 ml/min, 500 ml/min best
Dust	particles not exceeding I um, not exceeding 200 μg/Nm3
Pressure	10%± atmospheric pressure (air outlet should be atmospheric pressure)
Moisture	no more than 5 P saturated (no condensation)

 

Applications
Widely used in petroleum, chemical, smelting, building materials, light industry and other furnace, kiln or flue gas analysis, environmental monitoring, bioengineering, medical and health research and other reliable testing tools.

Notice of Order (Please specify when ordering)
Connection:
A,φ6 hose connection (standard)
B,1/4"-φ6 stainless steel jacket
C,1/8"-φ3 stainless steel jacket
2. Filters: GF2800,AF2000;
3. The measured gas components and measuring range;
4. Gas pressure under test: positive, micro or negative pressure;
5. The main components, impurities, sulfides of the gas under test