| Customization: | Available |
|---|---|
| Application Fields: | Medical |
| Certification: | ISO, CE |
|
Still deciding? Get samples of US$ 12450/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
This Nitrogen Compressor high pressure is suitable for inlet pressure 3-4bar and discharge pressure 150-200bar.
The Nitrogen Compressor flow rate of 15nm3-60nm3/hour of PSA air separation oxygen system provides clean oxygen filling service in clinic and hospitals. It can run continuously for 24 hours, and can reach more than 60 bottles per time. This is the feature of medical oil free high pressure Nitrogen Compressor.
Nitrogen Compressor adopts 4 stage compression, water/air cooling method and stainless steel water/air cooler to ensure the good cooling effect of the compressor, which can effectively extend the service life of key wearing parts. The inlet is equipped with low intake pressure and the exhaust end is equipped with exhaust. High pressure protection, high exhausts temperature protection, safety valve and temperature display for each stage. If over temperature and overpressure, the system will alarm and stop, ensuring safe operation. There is a forklift at the bottom of the compressor, which can be easily transferred.
All standard oil free high pressure Nitrogen Compressor are CE marked to meet the requirements of the worldwide market. We can also provide customized Nitrogen Compressor according to customer conditions.
| Model |
Capacity/
Flow Rate
|
Inlet Pressure | Discharge Pressure | Power | Weight | Weight |
| GOW-3/4-150 | 3m³/h | 3-4bar | 150bar | 3KW | 140kg | 850*640*680mm |
| GOW-5/4-150 | 5m³/h | 3-4bar | 150bar | 3.5KW | 320kg | 1000*800*1100mm |
| GOW-10/4-150 | 10m³/h | 3-4bar | 150bar | 5KW | 320kg | 1000*800*1100mm |
| GOW-15/4-150 | 15m³/h | 3-4bar | 150bar | 11.5KW | 960kg | 1650*950*1470mm |
| GOW-20/4-150 | 20m³/h | 3-4bar | 150bar | 12KW | 960kg | 1650*950*1470mm |
| GOW-30/4-150 | 30m³/h | 3-4bar | 150bar | 13.5KW | 960kg | 1650*950*1470mm |
| GOW-40/4-150 | 40m³/h | 3-4bar | 150bar | 15KW | 960kg | 1650*950*1470mm |
| GOW-50/4-150 | 50m³/h | 3-4bar | 150bar | 17KW | 960kg | 1650*950*1470mm |
| 1 | Completely 100% oil free, no oil required (depending on the specific model) |
| 2 | Cylinder is stainless steel |
| 3 | Oxygen for VPSA PSA and LOX gas source |
| 4 | Not any pollution, keep the same purity into the gas |
| 5 | High reliability and high quality |
| 6 | Low maintenance cost and simple operation |
| 7 | 4000 hours piston ring working life under low pressure conditions, 1500-2000 hours working life under high pressure conditions |
| 8 | TOP brand motor, can be specially pointed out, just like the SIMENSE brand |
| 9 | CE approved to meet the requirements of the EU market |
| 10 | According to the customer's specific working conditions, the compressor is designed for 1 machine compression, 2 stage compression, 3 stage compression and 4 stage compression |
| 11 | Low speed, long life, average speed 260-350RPM |
| 12 | Low noise, average noise below 75dB, can work quietly in the medical field |
| 13 | Continuous heavy-duty operation can run stably for 24 hours without stopping |
| 14 | Each stage has an interstate safety valve. If the stage is over pressured, the safety valve will take off and release the overpressure gas to ensure the stable operation of the compressor |
| 15 | Each level has a temperature controller. If the temperature between the stages exceeds the standard, the temperature display will sound and light alarm |
){kind=link}