Oxygen Booster Pump High Pressure Good Quality

Product Description

 

Oxygen Booster Pump High Pressure Good Quality 

 

Product Introduction

This Oxygen Booster Pump high pressure is suitable for inlet pressure 3-4bar and discharge pressure 150-200bar.

The Oxygen Booster Pump flow rate of 15nm3-60nm3/hour of PSA air separation oxygen system provides clean oxygen filling service in clinic and hospitals. It can run continuously for 24 hours, and can reach more than 60 bottles per time. This is the feature of medical oil free high pressure Oxygen Booster Pump.

 

Structural Advantage

Oxygen Booster Pump adopts 4 stage compression, water/air cooling method and stainless steel water/air cooler to ensure the good cooling effect of the compressor, which can effectively extend the service life of key wearing parts. The inlet is equipped with low intake pressure and the exhaust end is equipped with exhaust. High pressure protection, high exhausts temperature protection, safety valve and temperature display for each stage. If over temperature and overpressure, the system will alarm and stop, ensuring safe operation. There is a forklift at the bottom of the compressor, which can be easily transferred.

All standard oil free high pressure Oxygen Booster Pump are CE marked to meet the requirements of the worldwide market. We can also provide customized Oxygen Booster Pump according to customer conditions.

Technical Specification

 

Model	Capacity/ Flow Rate	Inlet Pressure	Discharge Pressure	Power	Weight	Weight
GOW-3/4-150	3m³/h	3-4bar	150bar	3KW	140kg	850*640*680mm
GOW-5/4-150	5m³/h	3-4bar	150bar	3.5KW	320kg	1000*800*1100mm
GOW-10/4-150	10m³/h	3-4bar	150bar	5KW	320kg	1000*800*1100mm
GOW-15/4-150	15m³/h	3-4bar	150bar	11.5KW	960kg	1650*950*1470mm
GOW-20/4-150	20m³/h	3-4bar	150bar	12KW	960kg	1650*950*1470mm
GOW-30/4-150	30m³/h	3-4bar	150bar	13.5KW	960kg	1650*950*1470mm
GOW-40/4-150	40m³/h	3-4bar	150bar	15KW	960kg	1650*950*1470mm
GOW-50/4-150	50m³/h	3-4bar	150bar	17KW	960kg	1650*950*1470mm

 

Technical Characteristics

1	Completely 100% oil free, no oil required (depending on the specific model)
2	Cylinder is stainless steel
3	Oxygen for VPSA PSA and LOX gas source
4	Not any pollution, keep the same purity into the gas
5	High reliability and high quality
6	Low maintenance cost and simple operation
7	4000 hours piston ring working life under low pressure conditions, 1500-2000 hours working life under high pressure conditions
8	TOP brand motor, can be specially pointed out, just like the SIMENSE brand
9	CE approved to meet the requirements of the EU market
10	According to the customer's specific working conditions, the compressor is designed for 1 machine compression, 2 stage compression, 3 stage compression and 4 stage compression
11	Low speed, long life, average speed 260-350RPM
12	Low noise, average noise below 75dB, can work quietly in the medical field
13	Continuous heavy-duty operation can run stably for 24 hours without stopping
14	Each stage has an interstate safety valve. If the stage is over pressured, the safety valve will take off and release the overpressure gas to ensure the stable operation of the compressor
15	Each level has a temperature controller. If the temperature between the stages exceeds the standard, the temperature display will sound and light alarm

 

Product Show