Oxygen Cylinder Filling Station 4 Stage Compression

Product Description

Oxygen Cylinder Filling Station 4 Cylinders 4 Stage Compression            

  

Introduction

Our Oxygen Cylinder Filling Station is total oil free, do not use any lubricate oil, and for the cylinder use stainless steel material, piston ring is self-lubricated material, all this guarantee oxygen is clean and no-pollution.

Oxygen Cylinder Filling Station working speed is slow, normally 200-400 rpm, to keep working do 24 hours heavy duty loading, this Oxygen Cylinder Filling Station main use for hospital oxygen supplier center, to increase oxygen supply line pressure to the room, also can boost oxygen, and filling to the cylinder, such as 15Mpa, 20Mpa. Our Oxygen Cylinder Filling Station can also be used in Industrial acetylene cutting, cutting steel scrap in steel factory, support Boiler oxygen combustion recycle the cryogenic liquid oxygen tank vapor oxygen to the tank.

Normally, according to customer oxygen application condition, our Oxygen Cylinder Filling Station has one pressure stage, two pressure stage, three pressure stage, and four pressure stage, and five pressure stage, by the cylinder, has single, double, three, and four cylinder.

 

 

Main Technical Parameters

 

No.	Item	Data
1	Compressor model	GOW-40/4-150
2	Compressor type	V type, reciprocating piston, water cooled, air cooled
3	Compression medium	oxygen
4	Volume flow	40nm3/h
5	Intake pressure	4bar
6	Exhaust pressure	150bar
7	Inlet temperature	≤40ºC
8	Exhaust temperature	no more than ambient temperature +15ºC after cooling
9	Driving mode	explosion-proof motor
10	External size (length × width × height)	1650*950*1470mm
11	Weight	960kg

Precautions for Use

1. Oxygen Cylinder Filling Station should be selected in a clean and dust-free room to work, the use of temperature should not be less than 0 ºC.
2. Oxygen Cylinder Filling Station can be bolted to a horizontal base or placed on a horizontal base table. A thick rubber plate with damping between the filling pump and the abutment shall be in contact with the base station smoothly.
3. Do not contact any fat object in contact with water, glycerin lubrication liquid.
4. Before the first use, the mechanical oil should be injected into the body, and after each replacement of mechanical oil, the body must be outside the grease wipe clean. Do not allow the oil from the upper and lower body joints, the sealing ring and the sealing cover outside the leakage.
5. Smoking is prohibited in the place of use, and strict forbidden prohibition system should be established. The filling workers must wear clean clothes without oil, and must wash their hands with soap before working.
6. Oxygen Cylinder Filling Station should be selected in a clean and non-greasy room to work, the use of environmental encounters not less than 0ºC, indoor lighting lines and power lines can not use the wire, the line connector must use explosion-proof junction box, oxygen filling indoor storage of large oxygen cylinders must not exceed the maintenance of good ventilation. The Oxygen Compressor and the large oxygen cylinder should be used in isolation.
7. Oxygen Cylinder Filling Station to be horizontally placed on the ground, four legs cushion flat. Use the external air source tube to connect the gas source bottle with the Oxygen Compressor connecting pipe and the sealing ring of the body connection should be installed correctly.

Why Choose Us

*We will answer calls and receive consultation documents from customer politely and earnestly, to know exactly about customers' site situation and technical requirements, and record all data in detail.
*We will carefully analyze the information supplied by customers, to provide catalog and technical proposal in time.
*We will contact customers regularly, actually knowing about the progress, thus can provide reasonable suggestions, to help customers reducing costs.
*We sincerely invite customers to visit our company, participating in technical discussion, to determine the best solution.
*If any trouble occurred during the equipment running period, our technicians will communicate with customers and help solve the problem in time.
*We will send technicians to help customers install, debug the equipment and train workers, until the workers are familiar with the operation, technical principle and simple maintenance of the system.
*All the equipment has 18-month warranty from delivery date.
*During the equipment running period, we will contact customers and ask for feedback regularly.