| Customization: | Available |
|---|---|
| Application Fields: | Medical |
| Certification: | ISO, CE |
|
Still deciding? Get samples of US$ 10870/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Oil free lubrication reciprocating piston type high pressure Oxygen Booster Compressor, there are air cooling and water cooling two cooling way, with single action and double action structure, and vertical and angle type etc.
Cape-Golden's high pressure Oxygen Booster Compressor lubrication system, with excellent performance, stable operation, high efficiency and energy saving, long service life, widely used in oxygen canned filling, chemical process and plateau. Together with oxygen generator to form a relatively simple and safe high-pressure oxygen system.
The Oxygen Booster Compressor involved in gas compression are not lubricated with thin oil, and the piston ring, guide ring and other friction seals are made of special materials with self-lubricating properties.
| No. | Item | Data |
| 1 | Compressor model | GOW-15/4-150 |
| 2 | Compressor type | V type, reciprocating piston, water cooled, air cooled |
| 3 | Compression medium | oxygen |
| 4 | Volume flow | 15nm3/h |
| 5 | Intake pressure | 4bar |
| 6 | Exhaust pressure | 150bar |
| 7 | Inlet temperature | ≤40ºC |
| 8 | Exhaust temperature | no more than ambient temperature +15ºC after cooling |
| 9 | Driving mode | explosion-proof motor |
| 10 | External size (length × width × height) | 1650*950*1470mm |
| 11 | Weight | Weight |
The Oxygen Booster Compressor should be installed in an indoor place with good lighting and ventilation, clean environment, and low air humidity. The foundation should be firm and flat, and the ambient temperature should be controlled below 38 ° C. There should be enough space around the machine for easy maintenance. When the Oxygen Booster Compressor runs, the vibration is small, and the requirements for the foundation are not strict. However, the thickness of the concrete of the foundation should be ≥20cm. The whole base should be closely attached to the horizontal plane of the foundation, which can be fixed with expansion bolts.
){kind=link}